Senior Paper Packaging Machinery Mfg. Co.
Manawala Khurd Road, Amritsar, Punjab
GST No. 03ABRFS7376R1Z1
TrustSEAL Verified
Call 0804898994785% Response Rate
SEND EMAIL
Product Details:
| Minimum Order Quantity | 1 Piece |
| Type of Machine | Paper Creasing Machine |
| Creasing Capacity | 3000 |
| Driven Type | Electric |
| Brand | Senior Boxmac |
| Power | 5 kW |
| Phase | Single Phase |
| Voltage | 380 V |
| Frequency | 50 Hz |
The creaser-slotter (creading-slotting machine), also known as the scorer-slotter, performs many simple tasks essential to the box making process. It creases and slots the blank, as the name implies. However, it also trims when needed and performs critical tasks for making the manufacturer’s joint. In order to complete all of these operations, many different parts make up this section, including two creasing shafts, two slotter shafts, and two pull rollers.
The creasing operation creates creases in the box to allow for folding later in the process. This procedure is performed by a male and female creaser. The male creaser contains the creasing heads and is responsible for making the creases on the corrugated board. It can be either on the top or bottom shaft. The most common creasers have three creasing heads per shaft. The top creaser is adjustable in order to make a harsher or lighter crease depending on the flute of the board running through the machine . For corrugated containers, scoring is always done on the inside of the box. When erecting a shipping container, the walls of the box are folded toward the groove.
Slotting, the next operation in the creaser-slotter, is necessary in order to fold the flaps of the box without them interfering with one another. Another pair of shafts in the creaser-slotter performs the slotting operation. This pair of shafts contains the slotter knives and the glue lap cutter. The slotting heads have two blades attached. Each blade cuts one side of the slot. Slot widths are commonly between 1/4 and 3/8 inch. The end of the slotter knife has a raised blade which cuts and detaches the third side of the slot. Slotting is always performed in a top down process for easy scrap removal. Scrap may also be accumulated from trimmings and cutting the glue lap.
Additional Information:
Product Details:
| Power | 2.2 kW |
| Frequency | 50 Hz |
| Driven Type | Electric |
| Size | 12 x 18, 19 x 33 & 24 x 36 inch |
| Voltage | 380 V |
This is a clutch operated machine for automatic stop after each impression. Most rigid machine to undertake full Load. Useful for manufacture of Envelopes. Inland letters, cards etc. Distance between the two plates is adjusted by means of Bevel gearing, according to pile of papers & height of die.
Product Details:
| Driven Type | Electric |
| Brand | Senior Boxmac |
| Power | 3.5 kW |
| Phase | Single Phase |
| Voltage | 380 V |
| Frequency | 50 Hz |
Product Details:
| Brand | Senior Boxmac |
| Power | 3.5 kW |
| Phase | Single Phase |
| Voltage | 380 V |
| Frequency | 50 Hz |
Product Details:
| Power | 3.5 kW |
| Phase | Single Phase |
| Voltage | 380 V |
| Driven Type | Electric |
| Frequency | 50 Hz |
Product Details:
| Brand | Senior Boxmac |
| Power | 5 kW |
| Phase | 3 Phase |
| Voltage | 415 V |
| Driven Type | Electric |
| Frequency | 50 Hz |
Product Details:
| Driven Type | Electric |
| Power | 3.5 kW |
| Phase | Single Phase |
| Voltage | 380 V |
| Frequency | 50 Hz |
With three groups for slotting, one group for angle cutting and two cutters for slitting paper and four creasers for creasing.
|
Product Details:
| Motor Power | Custom |
| Model Name/Number | Boxmac Rs-4 |
| Brand | Boxmac |
Adopt chain feeding way, digital counter to plan and design the order and the production quantity in advance
With three groups for slotting, one group for angle cutting and with two cutters for slitting paper and four sets of creasers for creasing, with 3HP Motor (SIEMENS/ CROMPTON) with Variable speed A.C Drive
Additional Information:
Product Details:
| Driven Type | Electric |
| Brand | Senior Boxmac |
| Power | 3.5 kW |
| Phase | Single Phase |
| Voltage | 380 V |
| Frequency | 50 Hz |
Product Details:
| Brand | Senior Boxmac |
| Power | 3.5 kW |
| Voltage | 380 V |
| Driven Type | Electric |
| Frequency | 50 Hz |
Product Details:
| Brand | Senior Boxmac |
| Voltage | 380 V |
| Motor Power | 5.5 kW |
| Frequency | 50 Hz |
Product Details:
| Minimum Order Quantity | 1 Piece |
| Size | 1450x2500 |
| Capacity | 60 |
| Usage/Application | Paper |
| Material | Mild Steel |
| Motor Power | 3 HP |
| Model Name/Number | BOXMAC CS12-2000 |
| Brand | BOXMAC SENIOR |
| Power Source | Electric |
| Thickness Of Plate | N/A |
| Minimum Distances Between Two Dies | 150mm |
| Speed Per Minute | 60 sheets per min. |
| Automation Grade | Semi |
| Floor Space | 10 feet x 12 feet x 4 feet |
| Packaging Speed | 60 Sheet/min |
| Gross Weight | 2800kg |
| Phase | Single Phase |
| Power | 5.5 kW |
| Frequency | 50 Hz |
| Voltage | 380 V |
| Country of Origin | Made in India |
Rotary Cutting, Creasing and Slotting Machine (RS-4) Chain Feeding (China Make)
With three groups for slotting, one group for angle cutting and two cutters for slitting paper and four creasers for creasing.
Adopt chain feeding way, digital counter to plan and design the order and the production quantity in advance.
Size: 1450 x 2500 mm
|
Additional Information:
Product Details:
| Brand | Senior Boxmac |
| Frequency | 50 Hz |
| Phase | Three Phase |
| Power | 3 kW |
| Voltage | 380 V |
Heavy Duty Partition Slotter Machine with Motor Pulley and Belt Complete and with all Standard Accessories.
Product Details:
| Minimum Order Quantity | 1 Unit |
| Motor Power | 5.5 kW |
| Weight | 1350 kg |
| Pipe Material | Stainless Steel |
| Voltage | 380 V |
| Frequency | 50 Hz |
| I Deal In | New Only |
| Phase | Three Phase |
Additional Information:
Product Details:
| Brand | Senior Boxmac |
| Speed Per Minute | 300 Ft |
| Floor Space | 85 x 52 inch |
| Gross Weight | 1700 kg |
| Size | 65 inch |
| Minium Distance Between Two Dies | 3 inch |
| Power Required | 1.5 hp |
| Size | Speed/Min | Minium Distance Between Two Dies | Power Required | Floor Space | Gross Weight |
| 75' | 300 FT/MIN | 3" | 2 H.P. | 98'X52'' | 2100 KGS |
| 85' | 300 FT/MIN | 3" | 2 H.P. | 110'X52' | 2300 KGS |
| 95' | 300 FT/MIN | 3" | 2 H.P. | 120'X60' | 2500 KGS |
| 105' | 300 FT/MIN | 3" | 3 H.P. | 130'X60' | 2700 KGS |
| 125' | 300 FT/MIN | 3" | 3 H.P. | 150'X70' | 3200 KGS |
Product Details:
| Minimum Cutting Capacity | 2 inch |
| Reel Loading Capacity | 1500 kg |
| Power Source | Electric |
| Voltage | 380 V |
| Frequency | 50 Hz |
| Motor Power | 5 hp |