New Items

SALIENT FEATURES

Ø Extra Heavy Duty Machine  

Ø Bed open at 85 Degree, Easy to operate gives extra time operator for feeding, Main safety Feature in our machine  

Ø Machine Equipped with Heavy shafts of Alloy Steel Material

Ø Main Shaft Dia 135mm

Ø All Side Gears and Double Helical gears hardened Steel   

Ø Fine Impression Adjustment in Microns through Eccentric Steel Worm Gears.

Ø All Pins are well Grounded, All buses are of Bronze Phosphorous Metal.

Ø Two  Milling Folding Steel Chases

Ø M.S. Plate Reversible

Ø Bearing SKF/NBC/NTN

Ø Control Panel and Motor are of Siemens

Ø Electro Magnetic Clutch & Brake to eliminate possibility of time lag between driving & breaking

Ø Dual Timing Device to give a variable period from half to ten seconds

Ø Two Safety Devices to stop the moving block immediately and isolate the starting mechanism With Skin Sensor

Paper Bag Making Machine Model BAGMAC Junior B With Double Colour online Printing

Size of paper bags: Width 5cm to 25cm, length 10cm to 35cm,

Side / bottom gussete 5cm to 8cm.

GSM of paper (Range): 30 to 100

BF of paper (Range): 14 to 35

Paper roll width Maximum: 66cm

Production per hour: 12000

Flexo Printing Attachment: Double colour

Drive Motor: 3 HP ( SIEMENS )

Standard Accessories of Double Colour Flexo Printing Machinery

1.      5Nos. of different sizes of width forming dies.

2.      5Nos. of different sizes of bottom/side gazette forming dies.

3.      5 Nos. of different sizes of length forming gear wheels.

4.      2set (4Nos) of different sizes of flexo printing stereo design rollers

Extra Spares :

Green Belt – 1 no. , Red belts – 1 set, Springs – 1 set,

Rubber guide rolls – 1 set, Rubber paper pulling rolls – 1 set,

and Tool box

Size : 32''
Technical Specifications: 

 
            ·        Heavy duty  High speed roll to roll lamination machine   
               with manual laoding twin shaft un-winder roll stand 
               along with surface type rewinder and with all standard 
               accessories complete.

·         Un-winder station complete fitted with Heavy ms pipe material  with manual break. 

·         Free roll assembly with stander bearing fitting

·         1 no. Steel drums roll & 1 no. Rubber Roll 6” dia.

·         Nip roll assembly mechanical type 4” dia. plating roll with rubber roll

·         Surface type winder system 3”core Airshaft assembly 1 no.

·         5 HP  A/C motor 1 nos.

·         control panel with A.C drive system

·         Un-wind dia. 1000 mm

·         Winder side dia. 1000 mm

Machine speed 80 meter/minute