Die Cutting Machines

Technical Specifications:

(A) One Set of Flute Rolls ‘B’ (52 Nos.)and one set of  flute rolls ‘E’ (86 Nos.) type or as per your  requirement

(B) Flute Rolls Dia 223mm material EN-19

(C) Gum Roll & Gum Pipe is Hard Chrome Plated.

(D) Patta less glue setting   attachment with glue Circulation system fitted with 1 H.P Motor.

(E) Electric Heaters 5 Nos. with Pre Heaters- 2Nos.with Heat Control Panel.

(F) 7.5 H.P. Motor with Variable Speed A.C  

      Drives Seimens/Crompton.

(G)Rewinding arrangement with 2Nos Rewinding Shafts.

(H)  Heavy Duty Self Loading Hydraulic Mill  

       Roll Stand.

(I) Control panel for synchronize with sheet cutter

(J) With all Standard Accessories Complete.  

BOXMAC DIE PUNCHING MACHINE

DIE PLATEN is designed for Die-Cutting, Embossing and Creasing Job on Paper, Card Board, Corrugated Board, Fiber Board, Vinyl, Foam, Rubber, Leather, Masonite, Cork Sheets, Polyurethane, Linoleum, etc. This is the right machine for printing presses to emboss stereoscopic designs and letters on delicate printed matters to meet the demand of both Packaging & Printing industries.

Size: 52” x 72”

                                        Platen Size: 56” x 76”       

SALIENT FEATURES

Ø Extra Heavy Duty Machine  

Ø Bed open at 85 Degree, Easy to operate gives extra time operator for feeding, Main safety Feature in our machine  

Ø Machine Equipped with Heavy shafts of Alloy Steel Material

Ø Main Shaft Dia 135mm

Ø All Side Gears and Double Helical gears hardened Steel   

Ø Fine Impression Adjustment in Microns through Eccentric Steel Worm Gears.

Ø All Pins are well Grounded, All buses are of Bronze Phosphorous Metal.

Ø Two  Milling Folding Steel Chases

Ø M.S. Plate Reversible

Ø Bearing SKF/NBC/NTN

Ø Control Panel and Motor are of Siemens

Ø Electro Magnetic Clutch & Brake to eliminate possibility of time lag between driving & breaking

Ø Dual Timing Device to give a variable period from half to ten seconds

Ø Two Safety Devices to stop the moving block immediately and isolate the starting mechanism With Skin Sensor

BOXMAC DIE PUNCHING MACHINE

DIE PLATEN is designed for Die-Cutting, Embossing and Creasing Job on Paper, Card Board, Corrugated Board, Fiber Board, Vinyl, Foam, Rubber, Leather, Masonite, Cork Sheets, Polyurethane, Linoleum, etc. This is the right machine for printing presses to emboss stereoscopic designs and letters on delicate printed matters to meet the demand of both Packaging & Printing industries.

Size: 40” x 53”

                                        Platen Size: 43” x 56”       

SALIENT FEATURES

Ø Extra Heavy Duty Machine  

Ø Bed open at 85 Degree, Easy to operate gives extra time operator for feeding, Main safety Feature in our machine  

Ø Machine Equipped with Heavy shafts of Alloy Steel Material

Ø Main Shaft Dia 135mm

Ø All Side Gears and Double Helical gears hardened Steel   

Ø Fine Impression Adjustment in Microns through Eccentric Steel Worm Gears.

Ø All Pins are well Grounded, All buses are of Bronze Phosphorous Metal.

Ø Two  Milling Folding Steel Chases

Ø M.S. Plate Reversible

Ø Bearing SKF/NBC/NTN

Ø Control Panel and Motor are of Siemens

Ø Electro Magnetic Clutch & Brake to eliminate possibility of time lag between driving & breaking

Ø Dual Timing Device to give a variable period from half to ten seconds

Ø Two Safety Devices to stop the moving block immediately and isolate the starting mechanism With Skin Sensor

BOXMAC DIE PUNCHING MACHINE

DIE PLATEN is designed for Die-Cutting, Embossing and Creasing Job on Paper, Card Board, Corrugated Board, Fiber Board, Vinyl, Foam, Rubber, Leather, Masonite, Cork Sheets, Polyurethane, Linoleum, etc. This is the right machine for printing presses to emboss stereoscopic designs and letters on delicate printed matters to meet the demand of both Packaging & Printing industries.

Size: 25” x 37”

                                        Platen Size:  28” x 40”      

SALIENT FEATURES

Ø Extra Heavy Duty Machine  

Ø Bed open at 85 Degree, Easy to operate gives extra time operator for feeding, Main safety Feature in our machine  

Ø Machine Equipped with Heavy shafts of Alloy Steel Material

Ø Main Shaft Dia 135mm

Ø All Side Gears and Double Helical gears hardened Steel   

Ø Fine Impression Adjustment in Microns through Eccentric Steel Worm Gears.

Ø All Pins are well Grounded, All buses are of Bronze Phosphorous Metal.

Ø Two  Milling Folding Steel Chases

Ø M.S. Plate Reversible

Ø Motor 5 H.P

Ø Bearing SKF/NBC/NTN

Ø Control Panel and Motor are of Siemens

Ø Electro Magnetic Clutch & Brake to eliminate possibility of time lag between driving & breaking

Ø Dual Timing Device to give a variable period from half to ten seconds

Ø Two Safety Devices to stop the moving block immediately and isolate the starting mechanism With Skin Sensor

BOXMAC DIE PUNCHING MACHINE

DIE PLATEN is designed for Die-Cutting, Embossing and Creasing Job on Paper, Card Board, Corrugated Board, Fiber Board, Vinyl, Foam, Rubber, Leather, Masonite, Cork Sheets, Polyurethane, Linoleum, etc. This is the right machine for printing presses to emboss stereoscopic designs and letters on delicate printed matters to meet the demand of both Packaging & Printing industries.

Size: 25” x 37”

                                        Platen Size: 28” x 40”       

SALIENT FEATURES

Ø Extra Heavy Duty Machine  

Ø Bed open at 85 Degree, Easy to operate gives extra time operator for feeding, Main safety Feature in our machine  

Ø Machine Equipped with Heavy shafts of Alloy Steel Material

Ø Main Shaft Dia 135mm

Ø All Side Gears and Double Helical gears hardened Steel   

Ø Fine Impression Adjustment in Microns through Eccentric Steel Worm Gears.

Ø All Pins are well Grounded, All buses are of Bronze Phosphorous Metal.

Ø Two  Milling Folding Steel Chases

Ø M.S. Plate Reversible

Ø Bearing SKF/NBC/NTN

Ø Control Panel and Motor are of Siemens

Ø Electro Magnetic Clutch & Brake to eliminate possibility of time lag between driving & breaking

Ø Dual Timing Device to give a variable period from half to ten seconds

Ø Two Safety Devices to stop the moving block immediately and isolate the starting mechanism With Skin Sensor

Automatic Online Paper Roll to Die Punching Flat Bed Machine Fitted with electro-magnetic clutch and break, kick separator with servo motor, Eye mark sensor, HMI Touch screen puller and paper roll stand

                                                                                  Size : 1200 x 500mm

Technical Specification

1. Equipped with accurate servo motor drive, it makes the machine run steadily and efficiently.

2. Material lifting adopt Hydraulic self loading paper roll lifter.

3. Adopt touch screen and PLC programmable control system, the work condition can be shown real time.

4. The machine has automatic counting system and separator The user can set a number to count. When sheet quantity meets the number, the conveyor will move.

5. Accurate color tracking system, color errors automatically shut down.

6. Machine speed 70-90 stocks per minute.

7. Motor 10 H.P ( SIEMENS).

BOXMAC DIE PUNCHING MACHINE

DIE PLATEN is designed for Die-Cutting, Embossing and Creasing Job on Paper, Card Board, Corrugated Board, Fiber Board, Vinyl, Foam, Rubber, Leather, Masonite, Cork Sheets, Polyurethane, Linoleum, etc. This is the right machine for printing presses to emboss stereoscopic designs and letters on delicate printed matters to meet the demand of both Packaging & Printing industries.

Size: 52” x 72”

                                        Platen Size: 56” x 76”       

SALIENT FEATURES

Ø Extra Heavy Duty Machine  

Ø Bed open at 85 Degree, Easy to operate gives extra time operator for feeding, Main safety Feature in our machine  

Ø Machine Equipped with Heavy shafts of Alloy Steel Material

Ø Main Shaft Dia 135mm

Ø All Side Gears and Double Helical gears hardened Steel   

Ø Fine Impression Adjustment in Microns through Eccentric Steel Worm Gears.

Ø All Pins are well Grounded, All buses are of Bronze Phosphorous Metal.

Ø Two  Milling Folding Steel Chases

Ø M.S. Plate Reversible

Ø Bearing SKF/NBC/NTN

Ø Control Panel and Motor are of Siemens

Ø Electro Magnetic Clutch & Brake to eliminate possibility of time lag between driving & breaking

Ø Dual Timing Device to give a variable period from half to ten seconds

Ø Two Safety Devices to stop the moving block immediately and isolate the starting mechanism With Skin Sensor

Automatic Online Paper Roll to Die Punching Flat Bed Machine Fitted with electro-magnetic clutch and break, kick separator with servo motor, Eye mark sensor, HMI Touch screen puller and paper roll stand

                                                                                  Size : 1200 x 500mm

Technical Specification

1. Equipped with accurate servo motor drive, it makes the machine run steadily and efficiently.

2. Material lifting adopt Hydraulic self loading paper roll lifter.

3. Adopt touch screen and PLC programmable control system, the work condition can be shown real time.

4. The machine has automatic counting system and separator The user can set a number to count. When sheet quantity meets the number, the conveyor will move.

5. Accurate color tracking system, color errors automatically shut down.

6. Machine speed 70-90 stocks per minute.

7. Motor 10 H.P ( SIEMENS).

BOXMAC EXPORT MODEL DIE PUNCHING MACHINE

DIE PLATEN is designed for Die-Cutting, Embossing and Creasing Job on Paper, Card Board, Corrugated Board, Fiber Board, Vinyl, Foam, Rubber, Leather, Masonite, Cork Sheets, Polyurethane, Linoleum, etc. This is the right machine for printing presses to emboss stereoscopic designs and letters on delicate printed matters to meet the demand of both Packaging & Printing industries.

Size: 52” x 72”

                                        Platen Size: 56” x 76”       

SALIENT FEATURES

Ø Extra Heavy Duty Machine   Weight 14.5 MT

Ø Bed open at 85 Degree, Easy to operate gives extra time operator for feeding, Main safety Feature in our machine  

Ø Machine Equipped with Heavy shafts of Alloy Steel Material

Ø All Side Gears and Double Helical gears hardened Steel   

Ø Fine Impression Adjustment in Microns through Eccentric Steel Worm Gears.

Ø All Pins are well Grounded, All buses are of Bronze Phosphorous Metal.

Ø Adjustable Chases To Easily Affix Dies , Can Interchange Die in 2 Minutes

Ø M.S. Plate Reversible

Ø Bearing SKF/NBC/NTN

Ø Control Panel and Motor are of Siemens

Ø Electro Magnetic Clutch & Brake to eliminate possibility of time lag between driving & breaking

Ø Dual Timing Device to give a variable period from half to ten seconds

BOXMAC DIE PUNCHING MACHINE

DIE PLATEN is designed for Die-Cutting, Embossing and Creasing Job on Paper, Card Board, Corrugated Board, Fiber Board, Vinyl, Foam, Rubber, Leather, Masonite, Cork Sheets, Polyurethane, Linoleum, etc. This is the right machine for printing presses to emboss stereoscopic designs and letters on delicate printed matters to meet the demand of both Packaging & Printing industries.                                                                                                                              Size: 25” x 37”

                                                 Platen Size: 28” x 40”       

SALIENT FEATURES

Ø Extra Heavy Duty Machine  

Ø Bed open at 85 Degree, Easy to operate gives extra time operator for feeding, Main safety Feature in our machine  

Ø Machine Equipped with Heavy shafts of Alloy Steel Material

Ø Main Shaft Dia 135mm

Ø All Side Gears and Double Helical gears hardened Steel   

Ø Fine Impression Adjustment in Microns through Eccentric Steel Worm Gears.

Ø All Pins are well Grounded, All buses are of Bronze Phosphorous Metal.

Ø Two  Milling Folding Steel Chases

Ø M.S. Plate Reversible

Ø Bearing SKF/NBC/NTN

Ø Control Panel and Motor are of Siemens

Ø Electro Magnetic Clutch & Brake to eliminate possibility of time lag between driving & breaking

Ø Dual Timing Device to give a variable period from half to ten seconds

Ø Two Safety Devices to stop the moving block immediately and isolate the starting mechanism With Skin Sensor

SALIENT FEATURES

Ø Extra Heavy Duty Machine  

Ø Bed open at 85 Degree, Easy to operate gives extra time operator for feeding, Main safety Feature in our machine  

Ø Machine Equipped with Heavy shafts of Alloy Steel Material

Ø Main Shaft Dia 135mm

Ø All Side Gears and Double Helical gears hardened Steel   SALIENT FEATURES  Extra Heavy Duty Machine     Bed open at 85 Degree, Easy to operate gives extra time operator for feeding, Main safety Feature in our machine    Machine Equipped with Heavy shafts of Alloy Steel Material  Main Shaft Dia 135mm  All Side Gears and Double Helical gears hardened Steel     Fine Impression Adjustment in Microns through Eccentric Steel Worm Gears.  All Pins are well Grounded, All buses are of Bronze Phosphorous Metal.  Two  Milling Folding Steel Chases  M.S. Plate Reversible  Bearing SKF/NBC/NTN  Control Panel and Motor are of Siemens  Electro Magnetic Clutch & Brake to eliminate possibility of time lag between driving & breaking  Dual Timing Device to give a variable period from half to ten seconds  Two Safety Devices to stop the moving block immediately and isolate the starting mechanism With Skin Sensor

Ø Fine Impression Adjustment in Microns through Eccentric Steel Worm Gears.

Ø All Pins are well Grounded, All buses are of Bronze Phosphorous Metal.

Ø Two  Milling Folding Steel Chases

Ø M.S. Plate Reversible

Ø Bearing SKF/NBC/NTN

Ø Control Panel and Motor are of Siemens

Ø Electro Magnetic Clutch & Brake to eliminate possibility of time lag between driving & breaking

Ø Dual Timing Device to give a variable period from half to ten seconds

Ø Two Safety Devices to stop the moving block immediately and isolate the starting mechanism With Skin Sensor

BOXMAC DIE PUNCHING MACHINE

DIE PLATEN is designed for Die-Cutting, Embossing and Creasing Job on Paper, Card Board, Corrugated Board, Fiber Board, Vinyl, Foam, Rubber, Leather, Masonite, Cork Sheets, Polyurethane, Linoleum, etc. This is the right machine for printing presses to emboss stereoscopic designs and letters on delicate printed matters to meet the demand of both Packaging & Printing industries.

Size: 25” x 37”

                                        Platen Size: 28” x 40”       

SALIENT FEATURES

Ø Extra Heavy Duty Machine  

Ø Bed open at 85 Degree, Easy to operate gives extra time operator for feeding, Main safety Feature in our machine  

Ø Machine Equipped with Heavy shafts of Alloy Steel Material

Ø Main Shaft Dia 135mm

Ø All Side Gears and Double Helical gears hardened Steel   

Ø Fine Impression Adjustment in Microns through Eccentric Steel Worm Gears.

Ø All Pins are well Grounded, All buses are of Bronze Phosphorous Metal.

Ø Two  Milling Folding Steel Chases

Ø M.S. Plate Reversible

Ø Motor 5 H.P

Ø Bearing SKF/NBC/NTN

Ø Control Panel and Motor are of Siemens

Ø Electro Magnetic Clutch & Brake to eliminate possibility of time lag between driving & breaking

Ø Dual Timing Device to give a variable period from half to ten seconds

Ø Two Safety Devices to stop the moving block immediately and isolate the starting mechanism With Skin Sensor

BOXMAC Heavy Duty Platen Die Cutter Press with Hot Foil Stamping Attachment is meant for Creasing. Cutting & Punching of Paper, Linoleum, Fiber, Cork, Leather, Plastic PVC Thin Metal Sheets, Card Board as well as Corrugated Boxes. The Machine is provided with Safety Devices like Electromagnetic Clutch, Timer, Brake, and Trip Bar & Safety Guard for Operator safety. The Machine is also equipped with Micron Impression Adjustment System, Dwell Timing Device, Centralized Lubricating System, Sheet Counter Along with all moving parts are protected by approved safety Guards and all standard accessories.

Size: 22”x 32”

Platen Size: 25”x 35”

Hot Foil Stamping Stepple Motor Precise

Attachment with

(A) Attachment of Hot Foil Unit with ONE Step. (B) Separate circuits on control panel to ON or OFF of four compartments.(C)We provide 18” x 24” Heater (D) Holes are illustrated on complete Heating Plate to fix Aluminium Sheet with Screw Instead of pasting. (E) Heating Plate is fitted with digitally displaced on machine with Thermostatically heaters. (F) Revinder Unit are separate for each foil (G) Stepple Motor with Drive & supply & MMI technology to Zero wastage of foil.

BOXMAC Heavy Duty High Speed Single Facer Paper Corrugation Machine (Oblique Type) Bearing Mounted   

                                                                                  Size: 52”       

Technical Specifications:

(A) One Set of Narrow (UV type) Flute Rolls

(B) Flute Rolls material alloy steel.

(C) Flutes in One Feet are 52 Nos. Flute Height 

      3.2mm

(D) Gum Roll & Gum Pipe is Hard Chrome Plated.  SS Gum Tray

(E) Glue circulation Pump.

(F)  Patta less glue setting attachment.

(G)Electric Heaters 3 Nos. with Pre Heaters-  2 Nos.  

(H)Motor – 7.5 HP with Variable Speed A.C Drives.      

(I)Rewinding arrangement with 2 Nos.  Rewinding Shafts.

(J)Self Loading Hydraulic Lifting Reel Stand with two unwinding shafts with 3 HP Motor.     

(K) Make of Bearings: NTN / SKF / NBC

(L) With all Standard Accessories Complete                     

BOXMAC Double Profile High Speed Paper Corrugation Machine

Heavy Duty Double Profile High Speed Paper Corrugation Machine with 2 Set of Flute Rolls as Per your Requirement & Hydraulic lifting Roll Stand with Motor & AC Drive Complete.

Size : 52”                                                          

Technical Specifications:

(A) One Set of Flute Rolls ‘B’ and one set of  flute rolls ‘A’ type or as per your  requirement

(B) Flute Rolls Dia 223mm material Alloy Steel

(C) Gum Roll & Gum Pipe is Hard Chrome Plated.

(D) Electric Heaters 5 Nos. with Pre Heaters- 2Nos.

(E) 7.5 H.P. Motor with Variable Speed A.C Drives Crompton.

 (F) Rewinding arrangement with 2Nos Rewinding Shafts.

(G) Heavy Duty Self Loading Hydraulic Mill Roll Stand.

(H) Control panel for synchronize with sheet cutter

(I) With all Standard Accessories Complete.   

BOXMAC DIE PUNCHING MACHINE

DIE PLATEN is designed for Die-Cutting, Embossing and Creasing Job on Paper, Card Board, Corrugated Board, Fiber Board, Vinyl, Foam, Rubber, Leather, Masonite, Cork Sheets, Polyurethane, Linoleum, etc. This is the right machine for printing presses to emboss stereoscopic designs and letters on delicate printed matters to meet the demand of both Packaging & Printing industries.

Size: 40” x 53 ”

                                        Platen Size: 43” x 56 ”      

SALIENT FEATURES

Ø Extra Heavy Duty Machine  

Ø Bed open at 85 Degree, Easy to operate gives extra time operator for feeding, Main safety Feature in our machine  

Ø Machine Equipped with Heavy shafts of Alloy Steel Material

Ø Heavy Main Shaft.

Ø All Side Gears and Double Helical gears hardened Steel   

Ø Fine Impression Adjustment in Microns through Eccentric Steel Worm Gears.

Ø All Pins are well Grounded, All buses are of Bronze Phosphorous Metal.

Ø Two  Milling Folding Steel Chases

Ø M.S. Plate Reversible

Ø Bearing SKF/NBC/NTN

Ø Control Panel and Motor are of Siemens

Ø Electro Magnetic Clutch & Brake to eliminate possibility of time lag between driving & breaking

Ø Dual Timing Device to give a variable period from half to ten seconds

Ø Two Safety Devices to stop the moving block immediately and isolate the starting mechanism With Skin Sensor

BOXMAC DIE PUNCHING MACHINE

DIE PLATEN is designed for Die-Cutting, Embossing and Creasing Job on Paper, Card Board, Corrugated Board, Fiber Board, Vinyl, Foam, Rubber, Leather, Masonite, Cork Sheets, Polyurethane, Linoleum, etc. This is the right machine for printing presses to emboss stereoscopic designs and letters on delicate printed matters to meet the demand of both Packaging & Printing industries.

Size: 22” x 32”

                                        Platen Size: 25” x 35”       

SALIENT FEATURES

Ø Extra Heavy Duty Machine   Weight 3000Kg

Ø Bed open at 85 Degree, Easy to operate gives extra time operator for feeding, Main safety Feature in our machine  

Ø Machine Equipped with Heavy shafts of Alloy Steel Material

Ø Main Shaft Dia 135mm

Ø All Side Gears and Double Helical gears hardened Steel   

Ø Fine Impression Adjustment in Microns through Eccentric Steel Worm Gears.

Ø All Pins are well Grounded, All buses are of Bronze Phosphorous Metal.

Ø Two  Milling Folding Steel Chases

Ø M.S. Plate Reversible

Ø Bearing SKF/NBC/NTN

Ø Control Panel and Motor are of Siemens

Ø Electro Magnetic Clutch & Brake to eliminate possibility of time lag between driving & breaking

Ø Dual Timing Device to give a variable period from half to ten seconds

Ø Two Safety Devices to stop the moving block immediately and isolate the starting mechanism With Skin Sensor

BOXMAC DIE PUNCHING MACHINE

DIE PLATEN is designed for Die-Cutting, Embossing and Creasing Job on Paper, Card Board, Corrugated Board, Fiber Board, Vinyl, Foam, Rubber, Leather, Masonite, Cork Sheets, Polyurethane, Linoleum, etc. This is the right machine for printing presses to emboss stereoscopic designs and letters on delicate printed matters to meet the demand of both Packaging & Printing industries.

Size: 25” x 37”

                                        Platen Size: 28” x 40”       

SALIENT FEATURES

Ø Extra Heavy Duty Machine  

Ø Bed open at 85 Degree, Easy to operate gives extra time operator for feeding, Main safety Feature in our machine  

Ø Machine Equipped with Heavy shafts of Alloy Steel Material

Ø Main Shaft Dia 135mm

Ø All Side Gears and Double Helical gears hardened Steel   

Ø Fine Impression Adjustment in Microns through Eccentric Steel Worm Gears.

Ø All Pins are well Grounded, All buses are of Bronze Phosphorous Metal.

Ø Two  Milling Folding Steel Chases

Ø M.S. Plate Reversible

Ø Bearing SKF/NBC/NTN

Ø Control Panel and Motor are of Siemens

Ø Electro Magnetic Clutch & Brake to eliminate possibility of time lag between driving & breaking

Ø Dual Timing Device to give a variable period from half to ten seconds

Ø Two Safety Devices to stop the moving block immediately and isolate the starting mechanism With Skin Sensor